Mandrel Pipe Benders

New, REINFORCED, version for tubes up to dia. 76 x 2mm stainless steel. Electronically programmable machines for bending tube and profiles with very tight radii: from 1.5 to 2.5 times the tube outside diameter (the bend radius depends on tube outside diameter, wall thickness, and material). Designed to meet the needs of users who require the maximum possible bend quality combined with very tight bend radii, ideal for medium-lowproduction volumes. Ease of use, flexibility, and rapid tooling change mean that the initial investment can be quickly recouped.

Pipe Bending with Mandrel Attachment
Pipe Bending with Mandrel Attachment

All models feature

  • Facility to bend oval, square and rectangular section tubes
  • Very high bending quality (minimum distortion of bent tube/profile)
  • Facility to bend very thin wall tubes and light gauge profiles
  • Semiautomatic X, Y, Z 3-axis control – bend angle, distance, rotation
  • Electric motor drive for low maintenance
  • Digital readout and programming of bend and spring-back angle
  • Digital readout and programming of rotation angle (plane variation)
  • Digital readout and programming of distance between bends
  • Electronic programming of bend and spring-back angle/angles
  • Tool changeover in less than 10 minutes

Demo


ACMA Megabender VS76 with Mandrel

Typical applications

  • Construction of stainless steel handrails for stairs
  • Bullbars
  • Roll-bars
  • Special exhaust pipes
  • Lamps
  • Pipes for the air conditioning sector

Specifications

Model Max bending capacity Workable length Minimum Bend Radius
030IT/A1.5/H76 76mm x 2mm 1.5m Between 1.5 and 2.5 times the diameter
030IT/A3/H76 76mm x 2mm 3m Between 1.5 and 2.5 times the diameter
030IT/A4/H76 76mm x 2mm 4m Between 1.5 and 2.5 times the diameter
030IT/A6/H76 76mm x 2mm 6m Between 1.5 and 2.5 times the diameter